Customer support

Office hours: Mon–Fri 8:00–17:00 · Sat 8:00–12:00 (GMT+7). Hotline 1900 633 514 · Zalo 0936 852 211

FAQ

How do I buy through the website?

Choose a unit, click "Add to quote request" and send your contact details. An ENCO engineer calls you back and sends a signed official quotation. The website does not take online payments.

Purchasing policy →
Is the on-site survey free?

Yes. ENCO surveys your site and calculates the moisture load free of charge. A quotation does not commit you to buy.

Book a survey →
How do I know what capacity my room needs?

Three things are needed: room volume (m³), the humidity to hold (%RH) and moisture sources (doors, goods, people). Use the Sizing tool for an estimate; an ENCO engineer recalculates during the survey.

Open the Sizing tool →
Should I choose HARISON or DRYMAX?

HARISON units are refrigerant dehumidifiers, effective for holding 50–60% RH (warehouses, workshops). DRYMAX uses a desiccant rotor for deep drying below 45% RH and works in cold rooms.

How long is the warranty?

The warranty period depends on the product line and is stated on the warranty card. ENCO covers manufacturing defects.

Warranty policy →
Does ENCO have service engineers in my province?

Resident technical teams in Hanoi, Bac Ninh, Quang Ngai and Ho Chi Minh City; service & experience centers in Bac Ninh, Da Nang and Thanh Hoa. Faulty units are handled by the nearest technician.

Does ENCO issue VAT invoices?

Yes. ENCO issues an e-invoice for every order. Payment is by bank transfer to an account in ENCO's name; ENCO never asks you to pay into a personal account.

How soon will I receive the unit?

In-stock units ship quickly to Ho Chi Minh City, Hanoi and other provinces. For made-to-order project equipment, the delivery time is set in the contract.

Delivery & installation →
Does ENCO take projects outside Vietnam?

Yes. ENCO has exported equipment to ASEAN countries since 2018. Please send your request to info@enco.com.vn.

Error codes & troubleshooting

Enter the code on the display or describe the symptom (e.g. E1, frost, no water).

Always switch off power before cleaning. Do not open the unit, repair wiring or recharge refrigerant yourself. Detailed error code tables for each model are being added by ENCO.

  • Display shows an error code (E…, F…, P…)

    1. Note the code and model, and take a photo of the display.
    2. Switch off, wait 3 minutes, then switch on again.
    3. Check whether the air filter is dirty or the water tank is full.

    Code still showing: send it to ENCO service using the form below.

  • Unit runs but collects no water / weak drying

    1. Clean the air filter (switch off before removing it).
    2. Check that the humidity setpoint is below the room humidity.
    3. Close the doors and limit outside air leaking in.
    4. Rooms below 15 °C: refrigerant units dry less; a low-temperature model or a desiccant unit is needed.

    Humidity still not dropping after these steps: book a technician.

  • Tank-full alarm, unit stops

    1. Empty the tank and refit it correctly.
    2. With a drain hose: check it is not kinked, blocked or raised above the drain outlet.

    Alarm with an empty tank: the float switch may be stuck; a technician should check it.

  • Frost or ice on the evaporator

    1. Switch off and let the ice melt completely.
    2. Clean the filter; keep air inlets and outlets clear.
    3. Check the room temperature is within the model's operating range.

    Repeated icing: possible low refrigerant or a faulty sensor; call a technician.

  • Unit does not power on

    1. Check the plug, socket and circuit breaker.
    2. Three-phase units: check all phases are present and the voltage is correct.

    Power is fine but the unit will not run: do not open it, call a technician.

  • Unit is noisy or vibrates

    1. Place the unit on a firm, level floor.
    2. Check the fan for obstructions (switch off first).

    Unusual noise from the compressor or fan: switch off and call a technician.

  • Unit smells musty

    1. Clean the air filter and water tank.
    2. Leave the tank dry when the unit is not used for a long time.

    Burning smell: switch off, unplug immediately and call a technician.

  • DRYMAX desiccant unit not reaching humidity / dew point

    1. Check the process air and reactivation air filters.
    2. Check doors and gaps in the room; leaking moisture raises the load.
    3. Check the reactivation heater indicator and that the rotor turns.

    Rotor not turning or reactivation heater not working: ENCO service is needed.

Book maintenance or repair

The nearest ENCO technician will call you to arrange a visit. For urgent help, call 1900 633 514.

HARISONDryMaxIKENOAikyoEdisonClimaTech