Completed projects

From an 86,000 m³/h steel-structure painting booth to a 20 %RH pharmaceutical production room. Each project clearly states the problem, the solution and the results.

Oil & gas · steel structuresPTSC fabrication yard, Vung Tau · 2023–2024

86,000 m³/h dehumidification for an oil & gas structure blasting & paint hall

Humid sea air makes blasted steel rust again and paint fail to bond, forcing rework. The structures stand tens of metres tall, so the whole hall must stay dry, not just a small zone.

View project
Oil & gas · steel structuresPTSC fabrication yard, Vung Tau · 2025

Dehumidifying blasting and painting enclosures for offshore wind substations (Baltica project)

The multi-storey substation modules are wrapped in tents for blasting and painting right on the yard. Humid sea air makes steel flash-rust after blasting and weakens paint adhesion unless the space is kept dry day and night.

View project
Industrial · large unitHai Phong · 2026

DryMax units for Shindong, including a 36,000 m³/h unit

A large multi-section unit that had to be fully assembled and tested at the factory before the long haul to Hai Phong.

View project
Export · AHUSingapore · 2026

AHU built at the DryMax factory, exported to Singapore

Sea-freight equipment must be finished, tested and crated at the factory, because repairs are hard once it arrives.

View project
Seafood · anti-condensationTien Giang · 2026

CDP-5000 anti-condensation units for Hai Dang seafood processing plant

Seafood processing rooms are cold and humid, so ceilings and pipes sweat; water dripping onto the line threatens food safety.

View project
Sugar · dryingAn Khe, Gia Lai · 2023

DRYMAX system for An Khe sugar mill

Finished sugar absorbs moisture and cakes if the air supplied to the dryer is damp; the units sit right inside the production area.

View project
Handicrafts · dryingDuc Linh, Binh Thuan · 2020

Rattan and bamboo product drying room with HARISON-DR dehumidifiers

Rattan and bamboo products must be dried consistently to keep their quality. Rainy, humid weather left the business unable to plan production.

View project
Agricultural produce · dryingLam Dong · 2023

Air-dried persimmon drying rooms for Lang Farm, Da Lat

Air-dried persimmons must dry slowly and evenly over many days. Da Lat is humid and misty, so natural drying easily leads to mould, weeping and colour loss, and output depends on the weather.

View project
Agricultural produce · dryingDryMax factory and customers · 2025

DryMax He-Dryer for chilli, lychee, leaves and herbal powder

High-temperature drying darkens produce and destroys aroma and active ingredients; sun drying depends on the weather and risks contamination.

View project
Gỗ · nội thấtFurniture factories · 2024

Timber stores and conditioning rooms for furniture factories

Kiln-dried timber picks up moisture again in storage during the rainy season: warping, cracked joints, surface mould and cloudy or blistered finishes.

View project
Gỗ · sấyDak Lak · 2024

Natural-wood drying room and store for CBS, Dak Lak

Natural wood is very wet and large piles go mouldy in the middle; export products need low, even moisture content so they do not mould in containers.

View project
Agricultural produce · dryingDon Duong, Lam Dong · 2020

DRYMAX 200 kg/h heat-pump drying system for agricultural produce

Premium produce needs a multi-stage drying process to keep its quality. The company also needed a system that qualified for the State programme supporting technology investment.

View project
Shipbuilding · engineeringHai Duong · 2016

33,000 m³/h dehumidification system for a painting and sandblasting booth

Northern Vietnam's damp spring season causes condensation on metal surfaces, affecting coating quality.

View project
Fresh airGE Energy, Hai Phong · 2018

DRYMAX dehumidifier for outdoor air treatment

Hot, humid fresh air supplied directly increases the moisture load and causes condensation inside the plant.

View project
AviationHo Chi Minh City · 2007

Dehumidification for aircraft engine storage, RH < 45 %

High humidity corrodes metal parts and electronic components of engines during storage.

View project
Pharma · electronics · cleanroomNationwide · since 1997

Humidity control for pharmaceuticals and electronics: 20 °C / 20 %RH

Powdered medicines, effervescent tablets and moisture-sensitive components require very low, stable humidity in line with GMP.

View project
Pharmaceuticals · effervescent tabletsBinh Duong · 2022

Moving a DryMax DMTH unit into the Vidipha pharmaceutical plant

Effervescent tablets are very sensitive to moisture; the plant room sits inside a working factory, so the unit had to be craned in over the roof.

View project
FoodOlam plants in Vietnam · 2022

DryMax DMTH units for Olam plants

The units sit outdoors all year in sun and rain, yet must keep conditions inside the plant stable.

View project

Present in 26 provinces and cities (after the 2025 merger)

More than 480 installations, commissionings and service visits documented with photos since 2022, in garment, pharmaceutical, electronics, food, seafood, logistics and shipbuilding plants.

Click a province to see ENCO's projects and sites there.

This list only counts projects with technical photo records since 2022. ENCO has worked in humidity control since 1999 and many earlier projects are not yet digitised. Province names follow the boundaries in force since July 2025.

North

Central and Highlands

South

HARISONDryMaxIKENOAikyoEdisonClimaTech