Oil & gas · steel structures

86,000 m³/h dehumidification for an oil & gas structure blasting & paint hall

PTSC fabrication yard, Vung Tau2023–2024

Scope

Dehumidification for the blasting and painting hall for offshore steel structures at the PTSC fabrication yard in Vung Tau, 86,000 m³/h of treated air, with control panels and a monitoring screen.

The customer's problem

Humid sea air makes blasted steel rust again and paint fail to bond, forcing rework. The structures stand tens of metres tall, so the whole hall must stay dry, not just a small zone.

ENCO's solution

DRYMAX desiccant dehumidifiers keep the dew point below the steel surface temperature throughout blasting and painting, controlled centrally through DHU panels and a monitoring screen.

Results

  • Completed and handed over, March 2024
86,000 m³/h dehumidification for an oil & gas structure blasting & paint hall

Photos from the site

Finished offshore steel structure beside the PTSC paint hall
Finished offshore steel structure beside the PTSC paint hall
Fabrication yard and large blasting and painting hall
Fabrication yard and large blasting and painting hall
Structure inside the paint hall
Structure inside the paint hall
Moving the painted structure out to the yard
Moving the painted structure out to the yard
Blasting inside the humidity-controlled hall
Blasting inside the humidity-controlled hall
Dehumidifier (DHU) control panel
Dehumidifier (DHU) control panel
Dehumidifier units installed at the hall
Dehumidifier units installed at the hall
Dehumidification monitoring screen
Dehumidification monitoring screen
Differential pressure gauge on a dehumidifier
Differential pressure gauge on a dehumidifier
Offshore jacket at the PTSC fabrication yard
Offshore jacket at the PTSC fabrication yard
Installing dry-air ducts into the paint hall at night
Installing dry-air ducts into the paint hall at night
Running ducts from the dehumidifiers into the hall
Running ducts from the dehumidifiers into the hall
Technicians installing ducts at height
Technicians installing ducts at height

Equipment in the same line

DRYMAX DM 10,000 m³/h
DRYMAX desiccant dehumidifiers

DRYMAX DM 10,000 m³/h

DM-10000R-AL

  • •Moisture removal capacity: 71.5 kg/h (20 °C/60%)
  • •Dry-air flow: 10,000 m³/h

Price on project basis

Contact us for a quote

DRYMAX DM 4,500 m³/h
DRYMAX desiccant dehumidifiers

DRYMAX DM 4,500 m³/h

DM-4500R-AL

  • •Moisture removal capacity: 32.2 kg/h (20 °C/60%)
  • •Dry-air flow: 4,500 m³/h

Price on project basis

Contact us for a quote

HARISONDryMaxIKENOAikyoEdisonClimaTech