Solutions by industry

Humidity control for pharmaceutical and electronics plants

Many pharmaceutical steps (effervescent tablets, soft capsules, hygroscopic powders) and electronic components need very low humidity that ordinary air conditioning cannot reach.

What moisture causes

  • Materials and tablets absorb moisture, cake and lose shelf life
  • Electronic components absorb moisture and crack during soldering
  • Cleanroom validation conditions are not met

Conditions to hold

Down to 20 °C / 20 %RH for special areas (per an ENCO project); pharmaceutical stores usually 30–45 %RH.

Reference values. ENCO engineers calculate to the requirements and actual moisture load of each site.

ENCO's solution

  • DRYMAX desiccant dehumidifiers and the DMTH series with integrated temperature and humidity control
  • Works with existing air conditioning and cleanrooms
  • Dry cabinets for components and optical instruments

Typical equipment

ENCO projects

FAQ

Can air conditioning bring humidity down to 20 %RH?

No. Ordinary air conditioning brings humidity to about 50–60 %RH; lower levels need a desiccant rotor dehumidifier.

How does DMTH differ from DM?

The DM series only dehumidifies; DMTH has an integrated cooling coil so it handles both temperature and humidity in one unit.

Ask ENCO engineers to design a solution for your site

Send the room size, target humidity and the goods stored; ENCO surveys and proposes a solution free of charge.

HARISONDryMaxIKENOAikyoEdisonClimaTech