
Price on project basis
Contact us for a quote
Solutions by industry
A cleanroom needs more than filtration and pressure control: temperature and humidity must also stay within product limits. Ordinary air conditioning only brings humidity down to about 50–60 %RH, so zones that need low, year-round stable humidity require desiccant rotor dehumidifiers.
Depends on the product: most pharma and electronics cleanrooms hold 30–55 %RH; special zones need down to 20 °C / 20 %RH (dew point −3.2 °C). ENCO engineers calculate the moisture load for each room.
Reference values. ENCO engineers calculate to the requirements and actual moisture load of each site.
It depends on the industry and product. Most pharma and electronics cleanrooms hold 30–55 %RH; special zones need lower, down to 20 %RH at 20 °C. The exact figure comes from the product file and the standard the plant follows.
Partly: the cooling coil condenses water vapour, usually bringing humidity to about 50–60 %RH. Going lower and holding it steady all year needs a desiccant rotor dehumidifier.
ENCO handles the humidity and temperature control: moisture-load calculation, choosing the solution, supplying, installing and servicing DryMax dehumidifiers, working alongside the project's cleanroom and HVAC contractors.
Send the room size, target humidity and the goods stored; ENCO surveys and proposes a solution free of charge.
Analytics cookies are only enabled if you agree. Details